RedMax GZ3500T Operator's Manual page 30

Kickback and guide bar nose radius
For sprocket nose bars the nose radius is defined by the
number of teeth (for example 10T). For solid guide bars
Guide bar
Length, in/mm Pitch, in
14/36 3/8
16/41
Filing equipment and filing angles
Use a RedMax file gauge to sharpen the saw chain. A
RedMax makes sure that you get the correct filing
angles. The part numbers are given in the table below.
H37 5/32 in / 4 mm
30
Gauge, in/mm Max. nose ra-
dius
0.050/1.3 7T
579 65 36-01
the nose radius is defined by the size of the nose radius.
For a given guide bar length, you may use a guide bar
with smaller nose radius than listed.
Saw chain
Type
RedMax H37
If you are not sure how to identify the type of saw chain
on your product, refer to www.redmax.com for more
information.
0.025 in / 0.65
mm
Length, drive Low Kickback
links (no.)
52 Yes
56
30° 80°
995 - 003 - 30.01.2019