Buttons - Siemens WM6HXKE0DN User Manual And Assembly Instructions

Buttons

Buttons
Below is an overview of the buttons and their setting options.
Buttons
The selection of programme settings depends on the selected programme. You
can see the selection options for each programme in the overview for
→ "Programmes", Page 28.
Button
(Start/Reload/
Pause)
varioSpeed
- ⁠ + (Ready in)
°C (Temperature Selec-
tion)
(Spin Speed Reduc-
tion)
(mains switch)
Selection
¡ Start
¡ Cancel
¡ Pause
¡ Activate
¡ Deactivate
¡ Activate
¡ Deactivate
¡ Basic dosage
¡ Activate
¡ Deactivate
¡ Dispenser contents
¡ Basic dosage
1–24 hours
⁠ – 90 °C
⁠ - 1600
¡ Switch on
¡ Switch off
Description
Start, cancel or pause the programme.
Activate or deactivate a short washing pro-
gramme.
Note: Energy consumption increases.
The washing result is not affected by this.
Briefly press the button to activate or deactivate
the intelligent dosing system for liquid detergent
⁠ .
Press the button for approx. 3 seconds to set the
basic dosage.
→ "Intelligent dosing system", Page 42
Briefly press the button to activate or deactivate
the intelligent dosing system for fabric softener
⁠ or liquid detergent
Press the button for approx. 3 seconds to specify
the contents of the dispenser or set the basic
dosage.
→ "Intelligent dosing system", Page 42
Set the programme end.
The programme duration is already included in
the set number of hours.
Once the programme has started, the pro-
gramme duration is displayed.
Adjust the temperature in °C.
Adjust the spin speed or activate
Hold).
If ⁠ is selected, the water is not drained at the
end of the washing cycle and the spin cycle is de-
activated. The laundry remains in the water used
for rinsing.
Switch the appliance on or off.
Buttons en
⁠ .
⁠ (Rinse
25