Wireless Microphone Operations - PROEL FREE6LT User Manual

WIRELESS MICROPHONE OPERATIONS

The FR3 Wireless Microphones system provided with the FREE6LT is a UHF, quartz controlled, fixed frequency
transmitter that provides a reliable, high-quality signal transmission.
The FR3 Wireless Microphone system features 3 units: FR3R receiver, FR3H handheld transmitter and FR3B
body pack transmitter.
The FREE6LT is provided as standards with one handheld wireless microphone (FR3R + FR3H) at 864.900
MHz. An optional wireless FR3B bodypack can be used instead of the FR3H supplied handheld microphone
(note that both transmitters cannot be used simultaneously).
FR3R is the UHF wireless microphone receiver:
26. RF
RED LED: indicates that the transmitter is sending a radio
signal to the receiver.
27. AF LEVEL
LED bar that shows the presence of an audio signal. Note that
the indication is independent from the VOLUME setting.
28. VOLUME+PWR
Volume potentiometer and ON / OFF switch of the wireless
receiver.
FR3H is the UHF wireless microphone handheld transmitter.

In order to open the handheld transmitter and to
access the batteries compartment, rotate the cover
as shown in the figure holding the top of the
microphone.
29. MICROPHONE GRILLE
This grid protects the microphone capsule and includes a pop
filter. The microphone uses a dynamic capsule with a cardioid
pattern.
30. BATT LED
This RED LED shows the battery status:
When the microphone is switched ON, the RED LED will
•
14