Download Print this page
ETC Echo E-SPM-RM Setup Manual

ETC Echo E-SPM-RM Setup Manual

Rack mount station power supply

Advertisement

Quick Links

E T C
S e t u p G u i d e
®
®
Unison Echo
O v e r v i e w
The Echo Rack Mount Station Power Supply (E-SPM-RM) is designed for use with the Echo control
system to supply power for up to 16 Echo control stations on the topology-free Echo control network.
N o t e :
R a c k M o u n t I n s t a l l a t i o n
Install Unit in Equipment Rack
The E-SPM-RM utilizes 2U of rack space.
Step 1:
Step 2:
Power an d Contr ol Wiring
The rack mount enclosure is provided with wiring connections on the rear of the unit.
Connect Power
Three IEC power cables are provided with this unit from the factory including US, UK, and Shuko.
Supply the Echo Station Power Supply with a single phase of 100-120VAC or 230-240 VAC, 50-60Hz.
Step 1:
Corporate Headquarters
London, UK
Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK
Rome, IT
Via Pieve Torina, 48, 00156 Rome, Italy
Holzkirchen, DE
Hong Kong
Rm 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong
Service: (Americas)
Web:
www.etcconnect.com
7186M2200
Rev A
Rack M oun t St at i on Powe r Sup pl y
Rack Mount Station Power Supply
If you are using Cat5 (or Cat5e) wiring, an external Echo Cat5 Termination Tray is
required. Contact ETC for ordering details. Control wiring instructions between the
termination tray and this Rack Mount Station Power Supply will be provided with the
Unison EchoConnect Cat5 Termination Tray installation instructions.
Locate the included rack mounting hardware kit including the mounting screws and
washers.
Use the hardware provided to mount the unit to the mounting rails in your equipment rack.
Connect the regional specific IEC power cable to the receptacle on the rear of the unit.
3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA
Tel +39 (06) 32 111 683
Ohmstrasse 3, 83607 Holzkirchen, Germany
service@etcconnect.com
(UK)
service@etceurope.com
Copyright © 2014 ETC. All Rights Reserved.
Released 2014-06
ETC intends this document to be provided in its entirety.
Tel +44 (0)20 8896 1000
Fax +44 (0) 20 8752 8486
Tel +49 (80 24) 47 00-0
Fax +49 (80 24) 47 00-3 00
(DE)
techserv-hoki@etcconnect.com
Product information and specifications subject to change.
Pag e 1 of 2
Tel +608 831 4116
Fax +608 836 1736
Fax +44 (0)20 8896 2000
Tel +852 2799 1220
Fax +852 2799 9325
(Asia)
service@etcasia.com
El ect r on ic T he at r e Con t ro ls , I nc .

Advertisement

loading

Summary of Contents for ETC Echo E-SPM-RM

  • Page 1 If you are using Cat5 (or Cat5e) wiring, an external Echo Cat5 Termination Tray is required. Contact ETC for ordering details. Control wiring instructions between the termination tray and this Rack Mount Station Power Supply will be provided with the Unison EchoConnect Cat5 Termination Tray installation instructions.
  • Page 2 E T C S e t u p G u i d e Rack Mount Station Power Supply Co nnect Contr ol Wiring Termination is available for a LinkPower (Belden 8471 or approved equal) station communication bus. LinkPower is based on serial LonWorks® and includes one pair of wires (data + and data-). the total combined length of a LinkPower wire run cannot exceed 1,640 feet (500m), with a maximum distance of 1,313 feet (400m) between any two devices.