Idea LUA6i Quick Start Manual

LUA6i
Install Passive Loudspeaker
LUA Series models are compact, passive loudspeakers that deliver
outstanding sonic definition and versatility that combine professional
finish and solid construction with original stylish design and excellent
acoustic qualities that are ideal for professional audio playback in mobile,
AV and distributed sound installed solutions. Ideal for restaurants, pubs,
lounges, museums, ...
LUA i loudspeakers are specially indicated for fixed installations and those
applications in which acoustical performance and aesthetics are essential,
above absolute power delivery and road-readiness.
LUA6i has been designed as a High-Fidelity work-horse for installations
of distributed audio that require truly superior BGM reproduction with
minimal impact on the aesthetics of the location and truly rugged and
solid construction compared to mosts products in this category. LUA6i
shares the concept and advantages of LUA5i, with increased LF extension
and power handling so that, depending on the application, can be used
with or without subwoofers.
LUA6i features a 1" dome tweeter and a high-performance 6" woofer in
a front-firing ported trapezoidal cabinet built with 12-mm Birch plywood
and durable, high resistant IDEA paint coating. The front side of the
loudspeaker is protected by a 1.5-mm weatherised steel grille and a
internal protective foam.
Installation of LUA6i is a quick, straightforward operation thanks to the
optional rear wall-mount accessory. Six M6 inserts in the rear side of the
cabinet allow for both vertical and horizontal installation with the wall-
mount bracket.
OPTIONAL INSTALLATION ACCESSORIES
Dedicated U-Bracket optional accessories are available for LUA6i in
horizontal and vertical and rear wall-mount versions.
Install de accesorry on the wall, fix the loudspeaker with M8 bolts into the
lateral inserts and lock the desired angulation with M6 bolts into one of
the 25 diferent positions (for UB-L6i-H and UB-L6i-V) and X positions for
rear-mount UB-L6i-R.
SYSTEM CONFIGURATION AND SETTINGS
LUA6i is a high performance loudspeaker that requires the LF
reinforcement of BASSO Series subwoofers BASSO10, wall-mount
BASSO10i and super-shallow BASSO12t (other third-party loudspeakers
can also be used provided the settings of the system are preserved).
For best results and long-life performance of
this professional audio equipment, a High-Pass
Filter Butterworth 24 dB at 50 Hz must be set.
Quick Start Guide
LUA6i
PARALLEL I/O A PARALLEL I/O B
Nominal Impedance: 16 Ohm
Recommended amplifier power:
100 - 400 Watt
NL-4 PINOUT
This product must be installed and/or operated Full Range Signal
by qualified professionals following safe practices
Parallel Signal
and local regulations. Refer to the owner's manual
for instructions and optional accessories. Made in Spain
PRODUCT OF EUROPE
Designed, engineered and manufactured
by IDEA in Cedeira (Galicia)
LUA6i optional installation accessories
1