Using Your Bar Fridge - Inalto IBF129S User Manual

USING YOUR BAR FRIDGE

The temperature selector knob is located on the right hand side wall of the refrigerator interior. The
thermostat knob controls the temperature.
The Theromstat Controls (Fig. 2)
• "Off": This turns the unit off
• "Min" or "1": A warmest temperature setting
• "Med" or "3": Normal operation (adequate for most situations)
• "Max" or "6": The coolest temperature setting
Note: During high ambient temperatures (I.e. on hot summer days) it may be necessary to set the
thermostat to the coolest setting (position "Max" or "6").This may cause the compressor to run
continuously in order to maintain a low temperature.
Using for the First Time
When you install your appliance, set the thermostat knob to "Med" or "3". Give your refrigerator time to
cool down completely before adding food. It is the best to wait 24 hours before adding food.
IMPORTANT: Once the unit has started, continuous operation is recommended. Please try and avoid
turning the unit off and on as this may affect the service life.
Fig. 2
11