Table of Contents
Advertisement
Element Replacement (see Fig. 3)
WARNING: Before undertaking this task ensure the heater is disconnected from the
electric supply and left to cool for a minimum of 30 minutes.
1. The heater should be taken off the wall.
2. Remove the 8 screws which hold the metal terminal cover box (A) on the back of
the heater.
3. This will allow access to the elements. Remove the retaining clips and spring clips
(C) to loosen the elements.
4. Disconnect the elements from their terminal blocks (B).
5. Remove the screws which hold the rear panel (D).
6. Remove the splash brackets (E) on the elements.
7. Bend the bars on the guard as indicated in Fig. 6 to remove it.
8. The old element should drop out through the front of the heater, reverse the process
when replacing with the new element.
Fig. 3
E
6
C
D
B
A
Advertisement
Table of Contents
