Table of Contents
Advertisement
6.1.
Air filter.
Never let the engine run without the air filter being fitted. A dirty air filter element affects the
engine performance, increases fuel consumption and makes it difficult to start. If you notice a
loss of engine power, check the air filter.
You MUST make sure that the housing is free of dust and debris DO NOT allow any dust or
debris to enter the carburetor.
6.1.1. Push clip (1) down and pull filter cover (2) away from machine, take care to release
lower clips (3).
6.1.2. Remove the filter (4) by pressing clip (5) and lifting filter clear.
6.1.3. Wash with soap and water. Never use petrol or benzene!
6.1.4. Allow the filter to air dry. To replace the filter reverse the above process.
N.B.
To reinstate the fliter assembly reverse the above process.
Page 15
Advertisement
Table of Contents
