Table of Contents
Advertisement
How to Use
Flow Meter Alarm
Preparation
Plug the bath drain.
14
2,3
1
3
(Starting with the power off)
1
Press the Power
On/Off Button
The temperature will be displayed
on the Remote Controller.
On
Previous set temperature (example:115°F)
On
Previous set temperature (example:46°C)
If the flow meter alarm is being used to
indicate when a tub is full:
• If any hot water is being used besides
what is going into the tub, the alarm
will sound before the tub is full.
• If there was water in the tub before the
fill began, or if the water is not shut off
manually when the alarm sounds, the
tub may overflow.
• If there was water in the tub before the
fill began, the temperature in the tub
after it is full may be different from the
temperature setting.
2
Set temperature.
(
On
Check the indicator lights.
Check the indicator lights.
)
Always check
temperature setting
before use.
Hot
Cold
Water temperature
Water temperature
Advertisement
Table of Contents
