Single Water Heater Only; Flow Meter Alarm - Noritz GQ-C3257WZ-FF US Owner's Manual

Single Water Heater Only

Operation
Preparation
(Example of bathtub filled with hot water.)
1
button is "ON".
2
1) Press the
cover, Select "Flow meter" using
the buttons.
2) Press the
3
Adjust the Flow Meter
Alarm volume setting
1) Change the volume with
your desired hot
water volume.
2) Press the
Fill Volume Options
10 15 20
40 60 80
30

Flow Meter Alarm

Confirm that the
stopper is closed.
Close the lid.
* Open the lid closest to the spout to allow for filling.
Check
1)
button inside the
2)
button.
1)
to
2)
button.
25 30 35 40 45
100 120 140 160 180 200
If the flow meter alarm is being used to
indicate when a tub is full:
• If any hot water is being used besides what
is going into the tub, the alarm will sound
before the tub is full.
• If there was water in the tub before the
fill began, or if the water is not shut off
manually when the alarm sounds, the tub
may overflow.
• If there was water in the tub before the fill
began, the temperature in the tub after it is full
may be different from the temperature setting.
Screen Display
(Ex: Home screen)
(Ex: Alarm off)
(Ex: 45 gal)
50 55 60 70 80
220 240 260 300 340 380
Description
* The indicator is lit.
* The current setting
temperature is displayed.
* The current hot water filling
volume is displayed.
* The set hot water volume will
be stored in memory.
* The screen returns to the
home screen.
* If the display is left untouched
for approximately 20 seconds
without pressing the
the setting will be completed and
the home screen will be restored.
(gal)
90 100 Alarm off
(L)
Alarm off
(Default setting = Alarm off)
button ,