Setting The Time And Date - Citizen E761 Setting Instructions Manual

4. SETTING THE TIME AND DATE

If the watch is provided with a cove open, the cover to set the time and
date, and close the cover once the time or date has been set.
Seconds (displays number
of years elapsed since the
most recent leap year and
month during date
correction
Setting the Time
1. When the crown is pulled out to the second click (time setting position), the
second hand rapicly advances to the 0 seconds position and stops.
2. Turn the crown and set the time.
When the crown is turned to the right, the hour and minute hands move forward
(clockwise rotation).
1. When turned to the left, the hour and minute hands move backward by one
minute (counter-clockwise rotation).
•
When the crown is turned continuously, the hands advance rapidly. Turn the
crown to either the left or right to stop the hands from advancing
rapidly.
NOTE 1: When correction in the forward direction, the date changes when the
hour and minutes hands indicate 12:00 AM. However, when the date is changed
7when the hands are in the "rapid advance" mode, the hour and minute hands
"pause" at the 12:00 am and then resume rapid advancement.
NOTE 2: When correcting in the backward direction, the date does not change
even if the hour and minute hands pass 12:00 AM
3. Return the crown to the normal position in synchronization with a telephone
time signal or other time service.
Return to Table of Contents
Return to Table of Contents
(0) Normal position (hours
and day/correction if time
difference
(1) Date correction position
(correction of number of years
elapsed since the most recent
leap year and month
(2) Time setting position
(correction of seconds and
minutes