Citizen E51 Series Abbreviated Instruction

English
• This watch is solar-powered. Expose the dial to light and use it sufficiently charged.
• To see details of charging time, specifications and operations, refer to the instruction manual:

Component identification

Hour hand
Second hand
• Actual appearance may differ from the illustration.

Setting the time

1.
Pull the crown out to position
The second hand points 0 second.
2.
Rotate the crown to set the time.
• The hour and minute hands move synchronously.
• Change of date indication shows it just became AM. Take care the time set
is AM or PM.
• When you rotate the crown quickly, the hand/indication will move
continuously. To stop the rapid movement, rotate the crown in either
direction.
3.
Push the crown in to position
time source to finish the procedure.
The second hand starts moving.
E51*/ E71*/ E76* Abbreviated instruction
Minute hand
Button
A
Crown
Date indication
Crown's position
0 1
.
2
in accordance with a reliable
0
E76* instruction manual

Setting the calendar

The calendar of this watch does not have to be adjusted manually until February
28, 2100 including leap years. (perpetual calendar)
1.
Pull the crown out to position
The second hand indicates "year" and "month".
2.
Rotate the crown clockwise to set the year and month.
"Month" corresponds to one of
the 12 zones shown in the figure
below.
Each number means month.
11
10
9
8
2
7
6
3.
Rotate the crown counterclockwise to set the date indication.
• When you rotate the crown quickly, the hand/indication will move
continuously. To stop the rapid movement, rotate the crown in either
direction.
• The date indication changes to the first day of the next month after
finishing setting if you set a non-existing day (ex.: Feb. 30).
4.
Push the crown in to position
The indication returns to current time.

Setting the time difference

You can set time difference to the time currently shown in 1-hour increments.
• You cannot set time difference if power reserve is insufficient.
1.
Push the crown in to position
2.
Press and release button
The second hand turns fully around.
3.
Rotate the crown to set time difference.
• Turn the crown clockwise to add hours; turn it counterclockwise to
subtract them.
• When you rotate the crown quickly, the hand/indication will move
continuously. To stop the rapid movement, rotate the crown in either
direction.
• To turn back the time difference adjustment, move the hour hand opposite.
• The adjustment status is automatically finished in 30 seconds after finishing
operation.
.
1
"Year" corresponds to the years
since leap year and indicated
with markers in the zone of each
month.
12
1
2
3
4
5
to finish the procedure.
0
.
0
.
A
Years since leap year: 0 (Leap
year)
Years since leap year: 1
Years since leap year: 2
Years since leap year: 3
0
1
2
3
1/2