Error Messages; Maintenance - JP Selecta CONTERM 19L Instruction Manual

INSTRUCTIONS MANUAL CODE 80368 REV A
J
.P. SELECTA s.a.u.
DEC2018
6. Select the working temperature by using the temperature selection
keys (4) & (5) (minimum at 3ºC below the desired safety tempera-
ture).
7. Close the door and turn the incubator on again with key (3). Once
the temperature is stabilized, the incubator is ready to work.
NOTE: Safety thermostat is especially useful when the user works
habitually at the same temperature.

ERROR MESSAGES

P.FAIL Power failure. The stove continues with the process.
Err will appear in green on the top line of the display.
TSEG Safety thermostat is open.
SENS Open temperature probe. Control does not detect the
temperature probe.
HEAT The heating element does not work. The equipment detects
that the temperature does not increase.

MAINTENANCE

Before removing the casing disconnect the equipment from the mains.
The manipulation of the internal electronic circuits of the incubator
by unauthorized personnel can cause irreparable damage. Take it
to one of the J.P. SELECTA, s.a.u. authorized technical services.
CLEANING:
For the cleaning of the different parts, use the following products:
Cleaning of stainless steel: Alcohol.
Cleaning of plastic: Alcohol with cotton duster.
Autovía A2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: www.jpselecta.es
(It can be modified without notice)
Tel 34 93 770 08 77 Fax 34 93 770 23 62
Page.: 14