Mounting The Fascia Doors - CDA FW522 Installation, Use And Maintenance Manual

Mounting the fascia doors

Fig. 8 - Fitting the decor door bracket
Remove the white decorative cover (Fig. 7) by lifting it upwards.
Obtain the below measurements:
Dimension B= Measure from the
underside surface of kitchen unit
to the bottom of fixing bracket.
fig. 7
Dimension C= Measure from the
underside surface of kitchen unit
to the top of next unit door.
Unscrew and remove the nuts
and washers from the top of the
fig. 8
appliance door to remove the bracket.
Fig. 9 - Fitting the decor door bracket
1
Subtract C from B and put the
fixing bracket (2) in place using this
2
measurement for vertical position and
place to the centre for horizontal position.
Secure the fixing bracket (2) using
screws(1).
fig. 9
Fig. 10 - Fitting the decor door
Place the decor door onto the appliance
door by inserting adjustment bolts into
the slots on the fixing bracket. Locate
the washers and screw the nuts onto the
fig. 10
adjustment bolts.
16