Mounting The Fascia Doors - CDA FW254 Use And Maintenance

Mounting the fascia doors

Fig. 6 - Fitting the decor door bracket
Remove the white decorative cover (Fig. 5) by lifting it upwards.
Obtain the below measurements:
Dimension B = Measure
from the underside surface
of kitchen unit to the bottom
of fixing bracket.
Fig. 5
Dimension C = Measure
from the underside surface
of kitchen unit to the top of
next unit door.
Unscrew and remove the
Fig. 6
nuts and washers from the
top of the appliance door to remove
the bracket.
1
Fig. 7 - Fitting the decor door
bracket
2
Subtract C from B and put the
fixing bracket (2) in place using this
measurement for vertical position
and place to the centre for horizontal
Fig. 7
position. Secure the fixing bracket (2)
using screws(1).
Fig. 8 - Fitting the decor door
Place the decor door onto the
appliance door by inserting
adjustment bolts into the slots on the
fixing bracket.
Fig. 8
16 | Instruction Manual