How To Set The Gas Grill; Cleaning The Accessories; Advance Cleaning Of Burner Cup And Cap; Making Settings On The Hob - Bosch HGG223326Z Instruction Manual

How to set the gas grill

Open the top cover. The top cover must remain open for as
1.
long as the oven is in operation.
Open the main gas supply to the appliance. Connect the plug
2.
to the socket.
Insert the protective plate into the groove under the control
3.
panel.
The protective plate is inserted with the longer edge at the
front with the elbow pointing downwards.
Secure the protective plate in the groove underneath the
control panel using the retainers.
Make sure that the protective plate is engaged in the
retainers. If the protective plate cannot be pulled out, it is
correctly engaged. You can now use the protective plate
safely. Otherwise, insert the protective plate into a groove at a
slightly higher angle and make sure that it engages in the
retainers.
Close the oven door so that it touches the protective plate.
4.
Press the function selector and turn it clockwise to the
5.
grill setting.
Keeping the function selector pressed, push the
6.
button.

Making settings on the hob

Your hob is equipped with four gas burners. The following
information explains how to light the gas burners and set the
size of flame.

Igniting the gas burners

Always position the burner cap exactly over the burner cup.
Openings on the burner cup are always unobstructed. All parts
must be dry.
Open the top cover. The top cover must remain open for as
1.
long as the oven is in operation.
Turn the switch for the desired burner anticlockwise to the
2.
large flame symbol .
—
The gas escaping from the gas grill is ignited using the
7.
ignition button. To activate the safety ignition, press and hold
the function selector for 10 seconds.
Check that the flame is lit. If it is not, repeat the process from
8.
step 5.
After 30 minutes, switch off the function selector. Once the
9.
oven has cooled down, remove the protective plate again.

Cleaning the accessories

Before you use the accessories for the first time, clean them
thoroughly with hot soapy water and a soft dish cloth.

Advance cleaning of burner cup and cap

Clean the burner cap (1) and cup (2) with water and washing-
up liquid. Dry the individual parts carefully.
Place the burner cup and cap back on the burner shell (5).
Ensure that the igniter (3) and flame safety pin (4) are not
damaged.
The nozzle (6) must be dry and clean. Always position the
burner cap exactly over the burner cup.
(
ignition
8
Press and hold the burner knob and press the ignition button
3.
at the same time. The gas burner ignites.
13