Inserting Needles; Needle System - JUKI MCS-1500N Instruction Manual

Using the machine
A
B
C
11

Inserting needles

・Switch the machine off (power switch "0").
・ Raise the needles fully by turning the handwheel.
・ Lower the presser foot.
・ To remove the needles loosen the needle set screws (A).
・ Place a needle, flat side towards the back into the hole of the nee-
dle inserter (B).
・ Insert the needle into the needle clamp (C).
・ Tighten the needle set screws.

Needle system

・ 130/705H (Household needles)
・ Use needles size No.70-90 (11-14).