Table of Contents
Advertisement
Preparing media
Disc
1
Press [x] on the unit to open the disc tray.
Put in a disc with the label facing up.
Press again to close the disc tray.
2
Press [SELECT <, >] repeatedly to select "CD".
USB
Preparation
Before you connect a USB device to the system, make
sure you do a backup of the data.
1
Decrease the volume and connect the USB device
to the USB port.
2
Press [SELECT <, >] repeatedly to select "USB A"
or "USB B".
Note:
• Do not use a USB extension cable. The system cannot
recognise USB device connected through a cable.
• Some devices cannot be charged as the maximum USB
charging current is 0.5 A only.
®
Bluetooth
You can connect and play an audio device wirelessly
through Bluetooth
.
®
Preparation
• Switch on the unit.
• Switch on the Bluetooth
the device near the system.
• Read the operating instructions of the device for details.
█ Pairing a device
Preparation
If this system is connected to a Bluetooth
disconnect it (
8).
1
Press [
].
If "PAIRING" is shown, continue with step 3.
2
Press [PLAY MENU] to select "PAIRING" and then
press [OK].
3
Select "SC-TMAX40" from the Bluetooth
the device.
If prompted for a passkey, input "0000" or "1234".
The device connects with this system automatically
after pairing is complete.
The MAC address (example: 6C:5A:B5:B3:1D:0F)
may be shown before "SC-TMAX40" is shown.
The name of the connected device is shown for a few
seconds.
Using the unit
1
Press and hold [
Select "SC-TMAX40" from the Bluetooth
2
the device.
8
feature of the device and put
®
device,
®
®
] until "PAIRING" is shown.
®
Note:
• You can pair up to 8 devices with this system. If a 9th device
is paired, the device that has not been used for the longest
time will be replaced.
• Depending on the searching functionality of the Bluetooth
device and the surrounding environment, if the product
name is not shown on the Bluetooth
switch off and then switch on the Bluetooth
device repeatedly during the pairing process.
█ Connecting a device
Preparation
If this system is connected to a Bluetooth
disconnect it (
1
Press [
"BLUETOOTH READY" is shown.
2
Select "SC-TMAX40" from the Bluetooth
the device.
The name of the connected device is shown for a few
seconds.
Start playback on the device.
3
Note:
• A device must be paired to connect.
• When "BLUETOOTH" is selected as the source, this system
will automatically try to connect to the last connected device.
("LINKING" is shown during this process.)
█ Multi Connect
This system supports Multi Connect, which can connect
up to 3 devices simultaneously.
To switch between the connected devices
When one of the connected devices is playing, you can
easily switch control to another connected device simply
by starting a playback on that device. The previous
playback will be paused automatically.
Note:
This function may not work for some apps or devices
(depending on app or device specifications).
█ Disconnecting a device
While a Bluetooth
Press [PLAY MENU] repeatedly to select
1
"DISCONNECT?".
Press [R, T] to select "OK? YES" and then press
2
[OK].
"BLUETOOTH READY" is shown.
menu of
To cancel, select "OK? NO".
Using the unit
Press and hold [
Note:
• This function disconnects all connected devices.
• A device is disconnected when you:
– Select a different source.
– Move the device out of the maximum range.
– Disable the Bluetooth
– Switch off the system or the device.
menu of
menu of the device,
®
8).
].
device is connected
®
] until "PAIRING" is shown.
transmission of the device.
®
®
feature of the
®
device,
®
menu of
®
Advertisement
Table of Contents
