Advertisement
Technical Specifications
Optical Inputs
2 x ber optic Inputs
Duplex (Singlemode) using LC/PC Connectors
SMPTE 297M - 2006
Hot pluggable
Input range (wavelength) 1260nm to 1620nm
RX sensitivity -1dBm to -16dBm
RX active LEDs on side of module
SMF (Singlemode) ber
SDI Outputs
2 x SDI video on 75 Ohm BNC connector
SMPTE 424M, SMPTE 292M, SMPTE 259M, DVB-ASI
Multi-standard operation from 270Mbit/s to 3Gbit/s
Return Loss: > 15dB to 1.5GHz and > 10dB up to 3GHz
+12VDC power supply (included)
( supports external power input from 9 - 14 VDC )
Power LED on side of module
We are constantly adding additional yellobrik modules.
Please visit our website for the latest product updates.
www.lynx-technik.com
LYNXTechnik
AG
yellobrik
®
Broadcast Television Equipment
yellobrik
®
ORR 1802-2
Dual SD/HD/3G Fiber to SDI Receivers
DC Power Input
LC Fiber Optic
Inputs (2)
®
LYNXTechnik
AG
RX 2 Active
RX 1 Active
Power
Connected
Quick
Reference
SDI Video
Outputs (2)
Advertisement
Table of Contents
Related Manuals for Lynx yellobrik ORR 1802-2
Summary of Contents for Lynx yellobrik ORR 1802-2
- Page 1 ( supports external power input from 9 - 14 VDC ) Power LED on side of module RX 2 Active RX 1 Active We are constantly adding additional yellobrik modules. Please visit our website for the latest product updates. www.lynx-technik.com Power Connected LYNXTechnik ® Broadcast Television Equipment...
- Page 2 Connections Power Lead Strain Relief The SDI video outputs are connected to the 75 Ohm BNC connections The module has a small hole in the case located above the power (up to 3Gbit). The ber input connection is LC Duplex SMF (Singlemode). connection to prevent the power lead being accidentally pulled out.
Need help?
Do you have a question about the yellobrik ORR 1802-2 and is the answer not in the manual?
Questions and answers