58 58
Occupant safety
Contact with the roof when the head
restraint is fully extended and locked in place
will not result in any restrictions on use.
O The child restraint system must not be put
under strain between the roof and the seat
cushion and/or be installed facing the wrong
direction. Where possible, adjust the seat
cushion inclination accordingly.
O The child restraint system must not be put
under strain by the head restraint. Adjust the
head restraints as appropriate.
1
LATCH-type (ISOFIX) mounting bracket
Before every journey, make sure that the
#
LATCH-type (ISOFIX) child restraint system is
correctly engaged in both mounting brackets
in the vehicle.
* N N O O TE TE Damage to the seat belt for the cen-
ter seat during installation of the child
restraint system
Make sure that the seat belt is not trap-
#
ped.
Attach the LATCH-type (ISOFIX) child restraint
#
system to both mounting brackets in the vehi-
cle.
F F ast
astening a T
ening a Top Tet
op Tether
her
& W W ARNING
ARNING Risk of injury or death if the
rear seat backrests are not locked a er
Top Tether belts are installed
The rear seat backrests may fold forwards
when you are driving.
As a result, child restraint systems will no lon-
ger be able to perform their intended protec-
tive function. This may also cause additional
injuries.