Table of Contents
Advertisement
by IP
You can click Add PC to add an access control rule for
Add PC
users by IP address.
If you want to remove some PC from the "IP Filtering
Table", select the PC you want to remove in the table and
Remove PC
then click "Delete Selected". If you want remove all PCs
from the table, just click "Delete All" button.
Filter client PC
Check "Enable MAC Filtering" to enable MAC Filtering.
by MAC
address
Fill in "Client PC MAC Address" and "Comment" of the PC
which is allowed to access the Internet, and then click
Add PC
"Add". If you found any typo before adding it and want to
correct it, just click "Reset" and the fields will be cleared.
If you want to remove some PC from the "MAC Filtering
Table", select the PC you want to remove in the table and
Remove PC
then click "Delete Selected". If you want remove all PCs
from the table, just click "Delete All" button. If you want to
clear the selection and re-select again, just click "Reset".
You can now configure other advance sections or start using the router.
78
Advertisement
Table of Contents
