Table of Contents
Advertisement
4. In the Select Network Protocol window, select the TCP/IP Protocol and click
the Ok button to start installing the TCP/IP protocol. You may need your
Windows CD to complete the installation.
5. After you install TCP/IP, go back to the Network window. Select TCP/IP from
the list of Network Protocols and then click the Properties button.
6. Check each of the tabs and verify the following settings:
• IP Address: Select Obtain an IP address from a DHCP server.
• DNS: Make all fields blank.
• WINS: Make all fields blank.
• Routing: Make all fields blank.
7. Click OK to confirm the setting. Your PC will now obtain an IP address
automatically from your Broadband Router's DHCP server.
Note: Please make sure that the Broadband router is the only DHCP server on
your LAN.
Once you've configured your PC to obtain an IP address automatically,
please proceed to Step 3
14
Advertisement
Table of Contents
