Specifications; Important Safety Instructions - Makita ML106 Instruction Manual

ENGLISH (Original instructions)
1. Battery cartridge
2. Red indicator
3. Battery release button
4. Indicator lamps

SPECIFICATIONS

Major Features
Operating time
(approximately)
Dimensions
Net Weight
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Operating time may differ depending on battery type and usage condition.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
WARNING:
Only use the battery cartridges listed above. Use of any other battery cartridges and chargers may cause injury and/or
fire.
Symbols
....... Read instruction manual.
................. Indoor use only
.................. Do not stare at the operating light
source.
................. Only for EU countries
Due to the presence of hazardous
components in the equipment, waste
electrical and electronic equipment,
accumulators and batteries may have a
negative impact on the environment
and human health.
Do not dispose of electrical and
electronic appliances or batteries with
household waste!
In accordance with the European
Directive on waste electrical and
electronic equipment and on
accumulators and batteries and waste
accumulators and batteries, as well as
their adaptation to national law, waste
electrical equipment, batteries and
accumulators should be stored
separately and delivered to a separate
collection point for municipal waste,
operating in accordance with the
4
5. Check button
6. Switch
7. Lens guard
8. Zoom ring
Voltage
LED
BL1015/BL1016 battery
BL1020B/BL1021B battery
BL1040B/BL1041B battery
with BL1040B/BL1041B battery
Parts description
Model
L 290 mm x W 66 mm x H 93 mm
IMPORTANT SAFETY
INSTRUCTIONS
WARNING:
When using electric tools, basic safety precautions should
always be followed to reduce the risk of fire, electric
shock, and personal injury, including the following:
READ ALL INSTRUCTIONS.
1. Before using battery cartridge, read all instructions
and cautionary markings on (1) battery charger, (2)
battery, and (3) product using battery.
2. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
3. Use a power source with the voltage specified on the
nameplate of the charger.
4. Do not attempt to use a step-up transformer, an
engine generator or DC power receptacle.
5. After charging or before attempting any maintenance
or cleaning, unplug the charger from the power
source.
9. Strap hook
10. Ring
11. Hole
ML106
DC 10.8 V - 12V max
4.9 W x 1 pc
5.0 hours
6.0 hours
12 hours
0.61 - 0.78 kg
regulations on environmental
protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.