Lumascape LS5070 Installation Instructions

LS5070
READ ALL SAFETY INSTRUCTIONS FIRST
› Follow instructions carefully, failure to do so will void
warranty.
› Ensure installation complies with local law and
applicable standards.
› Input voltage is 30 V DC
› Only use Lumascape power supply, control equipment
and accessories.
LUMASCAPE ASIA PACIFIC Brisbane Technology Park, 18 Brandl Street, Eight Mile Plains, QLD 4113, Australia
Phone +61 7 3854 5000 | Fax +61 7 3854 5001 | Email: sales@lumascape.com.au |
LUMASCAPE NORTH AMERICA 1300 Industrial Road, Unit #19, San Carlos, CA 94070, USA
Phone +1 650 595 5862 | Fax +1 650 595 5820 | Email: info@lumascape.com |
Products and specifications are subject to change without notice.
INSTALLATION INSTRUCTIONS
UNDERWATER LUMINAIRE
SURFACE MOUNT
LS5070
Fountain Light
› Ensure mains input power is surge protected.
› Never make connections whilst the power is
connected.
› Do not make modifications or alter the product.
› Luminaire must be submerged while in operation.
› Luminaire is factory sealed; opening will void warranty.
www.lumacape.com
www.lumacape.com
USA I Australia I Asia I Middle East I Europe
WARNING
Install in accordance with
National Electric Code, ANSI/NFPA 70 or
the Canadian Electrical Code,
Part I (CEC), CSA C22.1
IN0179US N180207
1 / 4