Outdoor Mounting - Roberts Gorden VANTAGE HEV-40 Installation, Operation & Service Manual

Gas-fired, low intensity unitary heater for harsh environments
Table of Contents

Advertisement

HEV-S
I
, O
ERIES
NSTALLATION
PERATION AND

6.1 Outdoor Mounting

The heater is meant for stationary mounting in all sit-
uations and should not be suspended from any struc-
ture which may become mobile or from any organic
structures such as trees. Clearances to combustibles
must be maintained in all cases; do not install heat-
ers in a location such as a parking area, where a
vehicle with a painted or non-metallic upper surface,
FIGURE 17: Critical Hanger Placement (Outdoor Installation)
NOTE: High efficiency reflectors should NOT be used in applications exposed to wind.
18
S
M
ERVICE
ANUAL
may be parked within the clearances to
combustibles. See Page 18, Figure 17.
The bottom of the combustion air inlet shall not be
less than 12" (30 cm) above a surface which could
support snow, ice, or debris.

Advertisement

Table of Contents
loading

Table of Contents