Use Remote Access; Remotely Access Your Router Using The Nighthawk App - NETGEAR Nighthawk AD7200 User Manual

Note: For enhanced security, restrict access to as few external IP addresses as
practical.
Select one of the following:
• Only This Computer. Allow access from a single IP address on the Internet. Enter
the IP address to be allowed access.
• IP Address Range. Allow access from a range of IP addresses on the Internet.
Enter a beginning IP address and an ending IP address to define the allowed
range.
• Everyone. Allow access from any IP address on the Internet.
7. Specify the port number for accessing the router web interface.
Normal web browser access uses the standard HTTP service port 80. For greater
security, enter a custom port number for the remote router web interface. Choose
a number from 1024 to 65535, but do not use the number of any common service
port. The default is 8443, which is a common alternate for HTTP.
8. Click the Apply button.
Your settings are saved.

Use Remote Access

To use remote access:
1. Launch a web browser on a computer that is not on your home network.
2. Type your router's WAN IP address into your browser's address or location field
followed by a colon (:) and the custom port number.
For example, if your external address is 134.177.0.123 and you use port number
8443, enter http://134.177.0.123:8443 in your browser.
Remotely Access Your Router Using the
Nighthawk App
You can use the Nighthawk app to remotely access your router and change its settings.
Before you can use remote access with the Nighthawk app, you must update your
router's firmware and download the latest Nighthawk app for your mobile device.
For more information about how to update your router's firmware, see Update the
Router Firmware on page 123.
Maintain the Router
Nighthawk AD7200 Gaming Router Model XR700
131 User Manual