NETGEAR Nighthawk AD7200 User Manual page 13

Table 1. LED descriptions
LED and Button
Power LED
Internet LED
2.4 GHz WiFi LED
5 GHz WiFi LED
60 GHz WiFi LED
Guest WiFi LED
USB 3.0 port 1 LED and
USB 3.0 port 2 LED
Hardware Setup
Nighthawk AD7200 Gaming Router Model XR700
Description
Solid white. The router is ready.
Blinking white. The router is not ready, firmware is upgrading, or the Reset
button was pressed.
Off. Power is not supplied to the router.
Solid white. The Internet connection is ready.
Blinking white. The port is sending or receiving traffic.
Off. No Ethernet cable is connected between the router and the modem.
Solid white. The 2.4 GHz WiFi radio is operating.
Blinking white. The router is sending or receiving WiFi traffic.
Off. The 2.4 GHz WiFi radio is off.
Solid white. The 5 GHz WiFi radio is operating.
Blinking white. The router is sending or receiving WiFi traffic.
Off. The 5 GHz WiFi radio is off.
Solid white. The 60 GHz WiFi radio is operating.
Blinking white. The router is sending or receiving WiFi traffic.
Off. The 60 GHz WiFi radio is off.
Solid white. The guest WiFi network is operating.
Blinking white. The router is sending or receiving WiFi traffic.
Off. The guest WiFi radio is off in both the 2.4 GHz band and the 5 GHz band.
Solid white. A USB device is connected and is ready.
Blinking white. A USB device is plugged in and is trying to connect.
Off. No USB device is connected, or someone clicked the Safely Remove
Hardware button and it is now safe to remove the attached USB device.
13 User Manual