Table of Contents
Advertisement
6. SEWING
(1) Before starting the sewing, please make sure the position and the function of the halt switch.
(2) Please do not touch the operating parts during sewing operation.
(3) It is very dangerous to operate the sewing machine without safety guards (eye guards, belt covers,
link covers, finger guards or the others). Please make sure to operate the sewing machine with safety
guards.
(4) Please make sure to turn the power switch off when stopping the sewing machine temporarily.
6-1. The sewing operation
(1) Turn the power switch on.
(2) Press the home position return icon
(3) Select a sewing data.
Press the
on the standard screen then, press the
(4) Select a target (internal memory/USB memory) to read the data from.
The screen as default setting is set to the reading from internal memory mode.
(The mode display at the left top on the screen is
Press the
,when switching the reading from the internal memory to the reading from USB
memory mode.
(Pressing the
Press the
(5) Select a data then, set the data.
Press the target data number then, press the
(6) Set the sewing speed.
Set the appropriate sewing speed by selecting
(7) Set the sewing material under the work holder.
(8) When the black foot switch is stepped on, the work holder goes down.
(When the sewing material has to be reset, step the black color foot switch again to make the work
holder go up.)
(9) Step on the gray color start switch so that the sewing machine starts sewing,
(10) After the sewing finishes, the work holder is lifted automatically then, the sewing material is released.
From the library of Superior Sewing Machine & Supply LLC - www.supsew.com
CAUTION
.
also can switch the target.)
to switch the page with full of data.
.
.)
.
or
. (10 selections of 0 to 9)
- 15 -
Advertisement
Table of Contents
