Table of Contents
Advertisement
3. LUBRICATION
(1) Please make sure to turn power switch off before lubricating.
(2) Please pay attention that oil does not get on your skin or in your eyes as it may cause an inflammation.
(3) Please make sure to keep oil out of the reach of children who may drink oil by mistake.
[Notice] Please make sure to lubricate when operating for the first time after the installation. Also, please
make sure to check the amount of oil when the machine has not been used for a long time.
(1) The oil tanks are set at three places of the machine. Pour oil through the oil holes of (No.1 to No.3) to
the oil tanks.
(2) The oil tank No.1 and No.2 have level marks (at the center of the tank). Running out the oil may cause
the machine to make abnormal noise and seize up. When the amount of oil decreases to one-third or
less than one-third, make sure to fill the tank with oil. Also, do not pour oil more than the level marks.
When tilting the machine head, it may cause oil leak.
(3) The oil tank No.3 shows the oil amount by the tip of the indicator. The appropriate oil amount is
between level marks (high and low red lines).
<2>
4. Initial setting of the control box
When using the sewing machine for the first time, the model and the language of the sewing machine in
use have to be set.
Refer to the instructions in the paragraph "[6] Initial Setting of System (Model/language Setting)" in the
CONTROL UNIT technical manual.
From the library of Superior Sewing Machine & Supply LLC - www.supsew.com
CAUTION
Level mark
<1>
<3>
- 9 -
Level mark
Indicator
Advertisement
Table of Contents
