Table of Contents
Advertisement
Display
+ digit
3.5 Residual heat indicator
WARNING!
from residual heat.
4. DAILY USE
WARNING!
Refer to Safety chapters.
4.1 Gas burners
Burner overview
A. Burner cap and crown
B. Thermocouple
C. Ignition candle
Description
There is a malfunction.
A cooking zone is still hot (residual heat).
Lock / The Child Safety Device function operates.
Incorrect or too small cookware or no cookware on the cooking
zone.
Automatic Switch Off function operates.
There is a risk of burns
The induction cooking zones make the
heat necessary for cooking process
directly in the bottom of the cookware.
The glass ceramic is heated by the heat
of the cookware.
Ignition of the burner
Always light the burner
before you put on the
cookware.
WARNING!
Be very careful when you
use open fire in the kitchen
environment. The
manufacturer declines any
responsibility in case of the
flame misuse.
A
1. Push the control knob down and turn
it counterclockwise to the maximum
gas supply position (
2. Keep the control knob pushed for
equal or less than 10 seconds. This
B
lets the thermocouple warm up. If
not, the gas supply is interrupted.
3. Adjust the flame after it is regular.
C
If after some tries the burner
does not light, check if the
crown and its cap are in
correct positions.
ENGLISH
9
).
Advertisement
Table of Contents
