Custom Settings - Kodak PIXPRO AZ527 User Manual

Custom Settings

The user can store frequently used shooting modes or scene modes with parameters and
switch to this mode for quick adjustment.
Settings under mode (unset state or
state after reset):
1. Rotate the mode dial to select
and then the camera enters the setting
interface as shown below:
Select one capture mode to define CS .
Auto Mode
Save
Exit
2. As shown in the picture, press the
/ button to select a capture
mode that you want to define as
and press the
shooting screen.
3. As shown in the picture, press the
button to confirm setting or to exit
without setting by turning the mode
dial.
,
,
button to enter the
Go to setting CS mode.
Rotate the mode dial to skip .
For setting under other modes (use this
method to select a different custom
setting):
1. Select any mode or scene mode to be
stored.
2. Set your desired parameters in the
current mode.
3. Press the button and then the
/ button to select
and press the
menu.
4. Press the /
select , and press the
button to enter the menu.
Yes
Or
button to enter the
button to
/
,
51