Table of Contents
Advertisement
Custom Settings (
The user can store frequently used
shooting modes; and parameters and
switch to this mode for a quick adjustment.
Settings under
mode (unset state or
state after reset):
1. Turn the Mode dial to select the
mode, and enter the setup screen, as
shown in the figure below:
Select one capture mode to define CS .
Auto Mode
Confirm
Exit
2. As shown in the figure, press the [
/[
] button to select a capture mode
that you want to define as
the
button to enter the shooting
screen.
3. As shown in the figure, press the
button, and choose whether to
continue the
mode setting or rotate
the Mode dial to skip.
)
]
, and press
Go to setting CS mode
Rotate the mode dial to skip.
For setting under other modes (use this
method to select a different custom
setting):
1. Select any mode to be stored.
2. Set your desired parameters in the
current mode.
3. Press the
button, press the [
/[
] button to select
press the
button to enter the menu.
4. Press the [
]/[
.
Yes
Or
, and
] button to select
]
49
Advertisement
Table of Contents
