Samsung MW76V Owner's Instructions Manual page 103

This product is a Group 2 Class B ISM
equipment. The definition of group
2 which contains all ISM equipment
in which radio-frequency energy is
intentionally generated and/or used in
the form of electromagnetic radiation for
the treatment of material, and EDM and
arc welding equipment.
For Class B equipment is equipment
suitable for use in domestic
establishments and in establishments
directly connected to a low voltage
power supply network which supplies
buildings used for domestic purposes.
INSTALLING YOUR MICROWAVE OVEN
Place the oven on a flat level surface
85 cm above the floor. The surface
should be strong enough to safety bear
the weight of the oven.
1. When you install your
oven, make sure there
is adequate ventilation
for your oven by leaving
at least 10 cm (4 inches) of space
behind and, on the sides of the oven
and 20 cm (8 inches) of space above.
MW76V-WW_XEE_DE68-03927H-00_EN.indd 7
2. Remove all packing materials inside
the oven.
3. Install the roller ring and turntable.
Check that the turntable rotates freely.
(Turntable type model only)
4. This microwave oven has to be
positioned so that plug is accessible.
If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
For your personal safety, plug the
cable into a proper AC earthed socket.
Do not install the microwave oven
in hot or damp surroundings like
next to a traditional oven or radiator.
The power supply specifications
of the oven must be respected and
any extension cable used must be
of the same standard as the power
20 cm 10 cm
above behind
cable supplied with the oven. Wipe
the interior and the door seal with
85 cm of 10 cm on
the floor
the side
a damp cloth before using your
microwave oven for the first time.
English - 7
English - 7
8/13/2015 11:34:24 AM