Pioneer VSX-LX303 Instruction Manual page 151

❏ The measurement results of Full Auto MCACC show different distances to the speakers from the
actual ones
• Depending on the speakers you are using, some errors may occur in the measurement results. If this is the case, make the settings in "System
Setup" - "Speaker" - "Distance".
❏ The measurement results of Full Auto MCACC show that the volume level of the subwoofer has been
corrected to the lower limit
• The volume level correction of the subwoofer may not have been completed. Lower the volume of the subwoofer before Full Auto MCACC
measurement.
❏ DRC function does not work
• Make sure the source material is Dolby Digital, Dolby Digital Plus, Dolby TrueHD, or DTS.
Contents Connections
≫
151
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
( p107)
≫