Speaker Combinations - Pioneer VSX-LX303 Instruction Manual

Speaker combinations

• Up to two powered subwoofers can be connected in either combination.
Speaker
FRONT
Channels
2.1 ch
3.1 ch
4.1 ch
5.1 ch
6.1 ch
7.1 ch
2.1.2 ch
3.1.2 ch
4.1.2 ch
5.1.2 ch
6.1.2 ch
7.1.2 ch
4.1.4 ch
5.1.4 ch
(*1) The Bi-AMP and ZONE speakers cannot be used simultaneously.
(*2) When using the ZONE 2 speakers, it is necessary to connect the ZONE 2 speakers to the HEIGHT 1 terminals, and the height speaker to the SURROUND BACK
terminals.
(*3) When using the Bi-AMP speakers, it is necessary to connect the Bi-AMP speakers to the HEIGHT 1 terminals, and the height speaker to the SURROUND BACK
terminals.
About the HEIGHT 1/HEIGHT 2
When connecting 2 sets of the height speakers, the combination of the height speakers that can be selected is as follows.
– Height 1 Speaker: Top Middle, Height 2 Speaker: Rear High
– Height 1 Speaker: Front High; Height 2 Speaker: One of Rear High/Top Middle/Top Rear/Dolby Enabled Speaker (Surround)
– Height 1 Speaker: Top Front or Dolby Enabled Speaker (Front), Height 2 Speaker: One of Rear High/Top Rear/Dolby Enabled Speaker (Surround)
When only 1 set of the height speakers is connected, 1 from the height speakers types can be selected.
Contents
SURROUND
CENTER SURROUND
Connections
≫
HEIGHT 1 HEIGHT 2
BACK
(*2) (*3)
(*2) (*3)
(*2) (*3)
(*2) (*3)
45
Front Panel≫ Rear Panel≫ Remote≫
Playback
≫ ≫
ZONE 2 (*1) ZONE 3 (*1)
Bi-AMP (*1) (ZONE
SPEAKER) SPEAKER)
(*3) (*2)
(*3) (*2)
(*3) (*2)
(*3) (*2)
Setup
≫
(ZONE