Table of Contents
Advertisement
EchoStar User Interface
9.
HOW TO RESET THE RECEIVER
NOTE
There are different procedures for a reset of the receiver.
■
Delete channels - to delete all channels from the channel and favorite lists.
■
Factory reset - to return to the factory defaults and pre-programmed channel lists.
■
Full reset - to delete all settings and start with the Guided setup.
Only the procedure for a Full reset followed by the Guided setup is given.
NOTE
This procedure is applicable to standard installations with a single dish and LNB.
Please refer to the Initial setup procedures for DiSEqC1.2 and GoTo X installations.
1. Press the MENU key.
2. Select User data -
Maintenance - Full reset
and press the OK key.
3. Enter your PIN-code.
4. Select Yes.
5. Wait for the Guided setup
menu to appear.
6. Press the red key.
7. In the Language menu,
make the required
selections.
8. Press the OK key.
10. HOW TO DO A SOFTWARE UPGRADE
WARNING
D
O NOT PRESS ANY KEYS DURING THE SESSION
UPGRADE SEQUENCE WHICH CAN DAMAGE THE RECEIVER PERMANENTLY
NOTE
On a regular basis, EchoStar offers software updates via satellite and the EchoStar
web site (where we also announce new software releases and related documentation).
If you have trouble to get a download with the latest software version, please ask your
retail seller or dealer for assistance
1. Press the MENU key.
2. Select User data -
Maintenance - Software
Upgrade and press the
OK key.
S/W Version 1.0
9. Press the green key.
10. In the User LNB menu,
make the required
selections.
11. Press the OK key to
confirm.
12. Press the MENU key.
13. Press the yellow key.
14. In the Satellite list, make
the required selections.
15. Press the OK key.
16. Press the blue key.
17. In the Dish installation
menu, make the required
selections:
,
THIS CAN INTERRUPT THE
3. The default settings are
pre-programmed.
4. Select Start to begin the
Software upgrade.
5. Follow the instructions as
given in the progress
screens.
Operation
Section 3
18. Select the satellite option.
19. Press the OK key and
make your selection.
20. Select the transponder
option.
21. Press the OK key and
make your selection.
22. Use the signal indicator to
check the signal strength
and quality.
23. Press the green key to
start Search channels.
S
OFTWARE
.
6. If you want to download
from another satellite,
please visit our web site
for detailed instructions.
Page 3 - 7
English
3
Advertisement
Table of Contents
