EchoStar DSB-800 2Ci User Manual page 9

Receiver to TV with Audio and Video RCAs
1. Connect the Off-air TV antenna or cable if available to the ANT IN socket of the EchoStar DSB-800 2CI.
2. Connect the TV Out socket of the EchoStar DSB-800 2CI with the RF IN of the TV set.
3. Connect the Video and Audio RCAs of the EchoStar DSB-800 2CI to the Video and Audio
RCAs of the TV set.
Receiver to TV with SCART Cables
1. Connect the Off-air TV antenna or cable if available to the ANT IN socket of the EchoStar DSB-800 2CI.
2. Connect the SCART cable from the TV SCART of the EchoStar DSB-800 2CI to the SCART of the TV set.
3. Search on the VCR for UHF channel # 38. This is the default channel where the EchoStar
DSB-800 2CI is programmed to.
4. When the EchoStar DSB-800 2CI is switched on the TV set still will automatically switch to the
SCART input of the TV.
TV
AUDIO
VIDEO
IN
IN
TV
TV SCART RF IN
8
TV ANTENNA
RF IN
TV ANTENNA