Troubleshooting; Maintenance; Protecting The Environment - Black & Decker BDCDD12 Original Instructions Manual

Screwdriving
Always use the correct type and size of screwdriver bit.
u
u
amount of washing liquid or soap as a lubricant.
Always hold the tool and screwdriver bit in a straight line
u
with the screw

Troubleshooting

Problem Possible cause
Unit will not start. Battery pack not
charged.
Battery pack will not Charger not plugged
charge. in.
Surrounding air
temperature too hot or
too cold.
Unit shuts off Battery pack has
abruptly. reached its maximum
thermal limit.
Out of charge. (To
maximize the life of
the battery pack it is
designed to shutoff
abruptly when the
charge is depleted

Maintenance

Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
Regularly clean the ventilation slots in your tool and
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior.

Protecting the environment

Z
Separate collection. This product must not be
disposed of with normal household waste.
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection.
Possible solution
Check battery pack charg-
ing requirements
Local regulations may provide for separate collection of elec-
Plug charger into a work-
ing outlet. trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
Move charger and battery
pack to a surrounding air
BLACK+DECKER provides a facility for the collection and re-
temperature of above 40
cycling of BLACK+DECKER products once they have reached
degrees F (45ºC) or below
105 degrees F (+40.5ºC)
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
Allow battery pack to cool
down.
will collect them on our behalf.
Place on charger
You can check the location of your nearest authorised repair
and allow to charge.
address indicated in this manual. Alternatively, a list of author-
ised BLACK+DECKER repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Batteries
u
Service Information
BLACK+DECKER offers a full network of company-owned
and authorized service locations throughtout Asia. All
BLACK+DECKER Service Centers are staffed with trained
personnel to provide customers with efficient and reliable
product service.
Whether you need technical advice, repair, or genuine factory
replacement parts, contact the BLACK+DECKER location
nearest to you.
(Original instructions)
z
Separate collection of used products and
packaging allows materials to be recycled and
used again.
Re-use of recycled materials helps prevent en-
vironmental pollution and reduces the demand
for raw materials.
Z
There are no user servicable parts inside.
At the end of your products life return the whole unit to
your service agent or to a local recycling station to have
the battery recycled. Do not throw the unit out with house-
hold waste.
ENGLISH
7