Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Kogan NBMCLMBDOMA
Summary of Contents for Kogan NBMCLMBDOMA
- Page 1 KIDS CLIMBING DOME NBMCLMBDOMA...
-
Page 3: Safety And Warnings
• Do not orientate the dome directly towards the sun. • If the climbing dome is faulty, stop use immediately. Contact help.Kogan.com for assistance. • Regularly check the climbing dome for wear and damage. If the climbing dome is... - Page 4 • Ensure regular inspections and maintenance on the dome’s components are performed. If inspections are not performed, the dome could overturn or otherwise become a potential hazard. • Do not fully tighten the nuts until assembly is complete. • Do not modify the climbing dome yourself. •...
- Page 5 COMPONENTS A Long tube (x5) B Short tube (x20) C Medium tube (x24) Hardware D 38mm M8 bolt (x20) E Gasket (x20) F M8 flat nut (x20) G Allen key (x1) H Spanner (x1) I Small protective cover (x8) J Large protective cover (x12)
- Page 6 ASSEMBLY Step 1: Making the octagonal base Find a flat surface at least 2 metres away from any obstructions. Connect a long tube (A) with a short tube (B). They can be connected by aligning the holes on one of the ends of each tube, placing a gasket (E) over top, then inserting a 38mm M8 bolt (D) through the gasket (E).
- Page 7 Step 2: Making the hexagon assemblies Arrange six medium tubes (C) in a hexagonal pattern as shown below. One end of each tube will meet and overlap in the middle with the other tubes, whilst the other end flares out. Align the holes in the middle.
- Page 8 Step 3: Connecting the hexagon assemblies to the octagonal base Locate the short tubes (B) on the octagonal base. With one hexagon, place the hole from one of the flared ends through one of the 38mm M8 bolts (D) secured in step 1 that connect one end of a short tube (B) to the octagonal base.
- Page 9 Step 4: Connecting the hexagon assemblies together Locate the long tubes (A) on the octagonal base. With a short tube (B), attach one end to one of the 38mm M8 bolts secured in step 1 (D). With another short tube (B), repeat the step for the next 38mm M8 bolt along the same long tube (A).
- Page 10 Step 5: Connecting the hexagon assemblies together continued With another short tube (B), align one end with the ‘X’ formation, pointing the tube to the centre of the octagonal base. With five holes aligned, place a gasket (E) on top, followed by a 38mm M8 bolt (D) and M8 flat nut (F).
- Page 11 Step 6: Connecting the top of the dome Using four short tubes (B), create a square in the centre and connect the four tubes pointing to the centre of the octagonal base from step 4 to each of its corners. Secure a corner by aligning the holes of a short tube (B) with one of the tubes pointing to the centre.
- Page 12 Step 7: Finishing the top of the dome Place a long tube (A) onto the 38mm M8 bolts (D) placed in step 5 over the diagonal of the square across the two corners not secured by M8 flat nuts. Place one M8 flat nut (F) each over top both ends of the long tube (A) and tighten.
- Page 13 Step 8: Covering the bolts Using the Allen key (G), cover the exposed 38mm M8 bolts (D) on the base of the dome with the small protective covers (I). Repeat by covering the remaining exposed 38mm M8 bolts with the large protective covers (J). I Small protective cover (x8) G Allen key (x1) J Large protective cover (x12)
- Page 14 Assembly complete! Note: If playground equipment is discarded, the equipment should be disassembled and disposed of without any unreasonable danger.
- Page 15 NOTES...
- Page 16 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...
Need help?
Do you have a question about the NBMCLMBDOMA and is the answer not in the manual?
Questions and answers