Remote Control Unit (Rcu) - EchoStar AD-3000 IP Viaccess User Manual

4. Remote Control Unit (RCU)

VIEW
The Power key turns the receiver on and off.
The LED (Light Emitting Diode) flashes red to show the remote is working.
The TV, VCR and SAT keys select the device to be controlled.
Pressing the SAT key allows the remote to control the functions
of the receiver.
The Volume and Channel keys control the two most
frequently used functions of the receiver.
The Mute key switches the sound on and off.
Number / Input keys enable direct channel selection command
selection using numeric keys.
The TV/RAD(Radio) key switches between TV and radio mode.
The FAV key shows a list of your selected favorite channels (To
define channels as favorite select the "Edit TV channel" menu).
The MENU key is used to see main menu or to return to previous
menu.
The cursor keys are for channel ?and ? and volume
The OK key is used to select a program, a highlighted line or
parameter value. Also you can see TV/Radio channel list while
watching TV or listening to the radio.
The EXIT key exits to the video viewing mode at any time.
The EPG key shows program information of the selected channel.
(EPG; Electronic Program Guide)
The Information key provides additional information about the
current channel and program (only available when provided by
the broadcaster). In the menus pressing this key provides up to
four lines of help.
The Subtitle key enables subtitling (only when provided by the broadcaster).
Selects the Audio Language or Soundtrack from among the data transmitted for the current
channel.
Shows a thumb nail representation of the current channel in the "Edit TV Channel",
"Parental Lock" and "EPG".
The SAT key shows a list of selectable satellites.
and
?
7
.
?