EchoStar AD-3000 IP Viaccess User Manual page 18

User's Setting
User's Settings are only accessible via the Installation screen.
Language Setting
User's Setting
Language Setting
1
Local Time Setting
2
3 A/V Output Setting
4
About Echostar
i
You can select the desired language for the OSG (On-Screen Graphics) display using the , keys when the
"Menu Language" option is selected. Similarly you can select a different audio channel when the "Audio
Language" option is selected. This option allows you to select a different language to listen to if supported.
Subtitle
Select the "Subtitle Language" in the "Language Setting" menu. While viewing a
channel, the subtitling option is available only when the selected subtitling language
is provided by the broadcaster.
To check if the subtitling language is available, press "
control unit, to show a list with all available subtitling languages.
Local Time Setting
To set your local time, input all the required data for the time
and date. This information has to be entered to enable
recording of the programs of your choice.
After entering the correct data for year, month, date, day,
hour, minute, select option 7 (Press the OK key to set the
time) and press the OK key to save the data.
It is recommended that the time and date set in this menu is
the same as of your VCR.
Now that the date and time has been set you could edit the
VCR timer settings.
Language Setting
Exit
" key on the remote
17
1 Menu Language
2 Main Audio Language
3 2nd Audio Language
Subtitle Language
4
i
Local Time Setting
1 Year
2 Month
3 Date
4
Day
5
Hour
6
Minute
7 Press OK to set the time
Local Time = --:--
i
× Ø
English
English
English
English
Exit
Subtitle
None
Eng
Ita
×
1999
Exit
Ø
Jan.
01
Sun.
00
00