Sony VGN-SZ110 Bluetooth&reg User Manual page 578

Using a mobile telephone for fax transmissions
This section describes how to send a fax using a mobile telephone as a modem.
→Setting up the mobile telephone
→Setting fax information
→Sending a fax
→Receiving a fax
Important
Please ensure that any drivers used to connect the PC to the mobile telephone have been installed.

A Bluetooth passkey (PIN code) is required for you to connect to the mobile telephone. Please make a note of your Bluetooth passkey before

you start the set-up process.
 A fax application is required for you to be able to send and receive faxes. The description below is based on a example using Microsoft Fax,
which is installed with Windows XP as standard.
If you are going to use a commercially available fax
on how to send and receive faxes.
Setting up the mobile telephone
Set up and register the mobile telephone as a fax service.
Procedure
1. Turn on the mobile telephone, and set it to be connectable
Note
o Please refer to the instruction manual for information on how to operate the telephone.
2.
Right-click on the Bluetooth
Note
o Alternatively, click [Start]→[All Programs]→[Bluetooth]→[Bluetooth Settings], and then click on [New Connection] from the
active [Bluetooth Settings] window.
application, then please refer to the manual that came with the application for information
TM wireless technology icon in the task tray, and then click on [Add New Connection]
[FAX]
Page 578