Connecting To A Lan Using An Access Point (Pan) - Sony VGN-SZ110 Bluetooth&reg User Manual

Connecting to a LAN using an access point (PAN)

This section describes how to connect to a network (for example, a company LAN or a personal home network) using a PAN profile-compatible
access point.
Please refer to "Using an access point (LAP) to connect to a
→Setting up the access point
→Connecting to a LAN (PAN)
Important
The access point must be started and a normal connection already established to the network before the access point is set up. Please refer

to the access point instruction manual for information on how to set up the access point.
A Bluetooth passkey (PIN code) is required for you to connect to the access point. Please make a note of your Bluetooth passkey before

you start the set-up process.
Setting up the access point
Procedure
1. Turn on the access point, and confirm that a connection has been established with the network
2. Right-click the Bluetooth
Note
Alternatively, click [Start]→[All Programs]→[Bluetooth]→[Bluetooth Settings], and then click on [New Connection] from the
o
active [Bluetooth Settings] window.
The [Add New Connection Wizard (Welcome to the Add New Connection Wizard)] window will appear.
3. Confirm that [Express Mode] has been selected, and then click on the [Next] button
LAN" if you are using a LAP profile-compatible access point.
wireless technology icon in the task tray, and then click on [Add New Connection]
TM
[PAN]
Page 55