Sony VGN-SZ110 Bluetooth&reg User Manual page 389

Using a wireless modem station
Important
Please refer to "What you need to know about using Bluetooth

in mind.
Modem station cannot be detected
 If the modem station is connected to and is being used by another device, the modem station will be undetectable even if you search for it.
Cannot connect to modem station
If the modem station is connected to and is being used by another device, no other device will be able to connect to the modem station.

Bluetooth passkey entry failed
 The Bluetooth passkey (PIN code) comprises a sequence of alphanumeric characters, with the letters able to be rendered in upper and
lower case.
If [Caps Lock] is on, the Bluetooth passkey may not be able to be entered correctly.
Cannot connect to telephone line
Please ensure that the telephone cable is connected from the socket to the "LINE" terminal on the modem station.

Note
o If the telephone cable has come loose because it has not been fully inserted into the socket, the resulting poor contact may prevent
data from being transmitted accurately.
o Communication will be impossible if the interior of the cable has been broken. Please replace the cable with another one.
 Please ensure that the two slide switches on the underside of the main unit have been set to the "NORMAL" and "MODEM" positions
respectively.
Cannot connect to the Internet
The telephone number of the connection (i.e., the telephone number for the access point of your Internet service provider) may not be

correct. Please check the telephone number.
 The user ID and/or password for the provider with whom you have signed up may have been entered incorrectly. Please check the user ID
and password.
 The default connection may have been configured with different settings. Please set the connection configured for mobile telephone use
as the default connection.
When you place a call using a company switchboard or other exchange, the system may require you to enter a "0" before the telephone

number itself. Please check the type of telephone line you are using.
Cannot send or receive faxes
 Once you have registered a wireless modem station as your fax server, you will need to enter the fax settings from the [Printer and Faxes]
window in the Control Panel.
Please refer to "Using a modem station for fax
 The telephone number of the fax destination may have been entered incorrectly. Please check the telephone number.
wireless
TM
transmissions" for information on the configuration procedure.
technology" for an understanding of the basic concepts to keep
Page 389