Suitable Cleaning Agents; Cleaning - Bosch CPA565GS0B Instruction Manual

DCleaning
W ith good care and cleaning, your appliance will retain
C l e a n i n g
its appearance and remain fully functioning for a long
time to come. We will explain here how you should
correctly care for and clean your appliance.
:
Warning – Risk of burns!
The appliance becomes very hot. Never touch the
interior surfaces of the cooking compartment or the
heating elements. Always allow the appliance to cool
down. Keep children at a safe distance.
:
Warning – Risk of electric shock!
Do not use any high-pressure cleaners or steam
cleaners, which can result in an electric shock.
:
Warning – Risk of injury!
Scratched glass in the appliance door may develop into
a crack. Do not use a glass scraper, sharp or abrasive
cleaning aids or detergents.
Note: Unpleasant odours, for example after fish has
been prepared, can be removed very easily. Add a few
drops of lemon juice to a cup of water. Always place a
spoon in the container to prevent delayed boiling. Heat
the water for 1 to 2 minutes at maximum microwave
output.

Suitable cleaning agents

To ensure that the different surfaces are not damaged
by using the wrong cleaning agent, observe the
information in the table. Depending on the appliance
model, not all of the areas listed may be on/in your
appliance.
You can buy other accessories for your appliance from
our customer service. Please specify the relevant
product number.
New sponge cloths may contain salts. Salts can cause
rust film on stainless steel, so cloths must always be
washed out thoroughly before use.
Microfibre cloth
The microfibre cloth is especially suitable for cleaning
easily damaged surfaces, such as glass, glass ceramic,
stainless steel or aluminium. It removes liquid and
greasy deposits in one go.
Order no. 00466148
Conditioning cloth for stainless steel surfaces
You can treat surfaces with a tested, recommended oil-
impregnated conditioning cloth (available from us),
which will make the surface more resistant to
fingerprints and scratches.
Order no. 00311134
Conditioning oil for modern stainless steel surfaces
This is the same conditioning oil that is used in the
cloths, and can be ordered from us in a bottle.
Order no. 00311567
Degreaser
For intensive removal of stubborn grease deposits from
surfaces.
Order no. 00311781
Descaling agent
To ensure that your appliance continues to operate
correctly, it must be descaled regularly. Only use a
recommended descaling agent to do this. Other
descaling agents may damage the appliance.
Liquid descaling agent: Order no. 00311680
Descaling tablets: Order no. 00311864
Caution!
Surface damage
Do not use any
harsh or abrasive cleaning agents,
■
cleaning agents with a high alcohol content,
■
hard scouring pads or cleaning sponges,
■
high-pressure cleaners or steam cleaners,
■
special cleaners for cleaning the appliance while it is
■
hot.
Area

Cleaning

Appliance exterior
Stainless steel Hot soapy water:
front Clean with a dish cloth and then dry with a soft
cloth.
Remove flecks of limescale, grease, starch and
albumin (e.g. egg white) immediately. Corrosion
can form under such flecks.
Special stainless steel cleaning products suitable
for hot surfaces are available from our after-sales
service or from specialist retailers. Apply a very
thin layer of the cleaning product with a soft cloth.
Control panel Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
Do not use glass cleaner or a glass scraper.
Door panels Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
Do not use a glass scraper or a stainless steel
scouring pad.
Door handle Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
If descaler comes into contact with the door han-
dle, wipe it off immediately. Otherwise, any stains
will not be able to be removed.
Appliance interior
Self-cleaning sur- Observe the instructions for the surfaces of the
faces cooking compartment that follow the table.
Inside of the door Hot soapy water:
Clean with a dishcloth.
and door seal
Do not remove the door seal.
Do not scour.
Check the position of the door seal after cleaning
it.
Cleaning en
29