Table of Contents
Advertisement
Touch the microwave setting field to select the
2.
power setting you require.
The microwave setting will be highlighted and a
default cooking time will be shown on the display.
Use the rotary selector to set the required cooking
3.
time.
Note:
You can also set the cooking time first and
then the microwave setting.
Touch the start l stop button.
4.
The time remaining will count down on the display.
The start l stop LED will be lit.
The cooking time has elapsed
An audible signal sounds. Open the appliance door or
touch any field.
Changing the cooking time
Use the rotary selector to change the cooking time.
After a few seconds, the change is applied.
Changing the microwave power output
Touch ! until the required level is selected in the
display.
Notes
Touching it several times switches the power levels
■
from the highest to the lowest level.
If the microwave function is only added after the
■
start, the appliance pauses. Press start l stop to
start operation
Pausing the operation
Touch the start l stop field or open the appliance
1.
door.
The operation is suspended and the
start l stop LED flashes.
Close the appliance door.
2.
Touch the start l stop field.
3.
The operation is continued and the start l stop LED
lights up.
Stopping the appliance from heating
Turn the function selector to the "Off" position.
The appliance will stop heating and all the settings will
be cleared.
Note:
The fan may continue to run after the appliance
has been paused or stopped.
Setting the microwave to combined
operation
Y ou can combine the microwave function with all types
S e t t i n g t h e m i c r o w a v e t o c o m b i n e d o p e r a t i o n
of heating and the steam function. The appliance heats
up and the microwave is switched on at the same time.
As a result, the food is ready in a much shorter time.
Combination options
" Steam
■
< Hot air
■
( Grill
■
4 Hot air grill
■
Exceptions:
! Microwave setting, 1000 watts
< Hot air 40 °C
Setting combined operation
Example: Hot air < 190 ºC with microwave at 360 W,
17 minutes.
Use the function selector to set the Hot air <
1.
function.
A default value for the temperature is displayed.
Turn the rotary selector to set the desired
2.
temperature.
Touch the microwave power output field ! until the
3.
required level is selected in the display.
A default cooking time appears.
Set the cooking time using the rotary selector.
4.
Touch start l stop.
5.
The operation starts and the start l stop LED lights
up. The cooking time starts counting down.
The cooking time has elapsed
A signal sounds and the start l stop symbol stops
lighting up. Combination mode has finished. Touch any
field to end the acoustic signal.
Changing the microwave power output
Touch ! until the required level is selected in the
display.
Microwave
en
17
Advertisement
Table of Contents
