Alpine CDE-203BT Owner's Manual page 37

Mounting the unit in the dashboard
Before installing, make sure the catches on both
sides of the bracket are bent inwards 2 mm
(3/32 in).
1
Position the bracket
dashboard, then bend the claws outward
for a tight fit.
53 mm (2 1/8 in)
2
Mount the unit onto the bracket
attach the protection collar
Notes
• If the catches are straight or bent outwards, the unit will
not be installed securely and may spring out.
• Make sure the 4 catches on the protection collar
properly engaged in the slots of the unit.
Detaching and attaching the front
panel
For details, see "Detaching the Front Panel"
(page 9).
Resetting the unit
For details, see "Resetting the Unit" (page 9).
inside the
182 mm (7 1/4 in)
Catch
, then
.
are
37
-EN