Loading The Personal Watercraft (Pwc) - BRP Sea-Doo MOVE Operator's Manual

LOADING THE PERSONAL WATERCRAFT (PWC)

1. Disconnect lights connector.
2. Have someone guiding you and
back the vehicle until the trailer
reaches the desired depth into wa-
ter.
NOTE: Bunks should be immersed in
water just enough for the PWC to be
dragged onto them without floating
over them.
3. Unwind the winch strap to the ap-
propriate length.
4. Align the PWC with the trailer
bunks.
5. Attach the winch strap to the PWC's
bow eyelet.
5.1 Pass the small strap through
the bow eyelet.
5.2 Hook the small strap securely.
219001876-002_a
219001876-003
SMALL STRAP HOOKED
NOTICE
Attach the strap as ex-
plained . Using another method
may damage to the PWC.
______________
24
6. Set winch mechanism to "wind",
then wind until PWC bow reaches
the trailer bow stop roller.
smo2010-003-011_a
SET WINCH TO "WIND"
7. Drive the tow vehicle out of the
ramp.
8. Secure PWC on the trailer using
suitable tie-downs attached to the
stern eyelets and trailer eyelets to-
gether.
smo2012-007-053_a
TYPICAL - MOVE I (EXCEPT ALUMINUM)
1. Trailer eyelets
2. PWC eyelets
219001876-004_a
TYPICAL - MOVE I (ALUMINUM)
1. Trailer eyelets