Location - Kenwood KID60S17 Installation Instructions Manual

installation

location

When selecting a position for your dishwasher
you should make sure the installation surface
is flat and firm, and the room is well ventilated.
Avoid locating your dishwasher near a heat
source, eg. cooker, boiler or radiator. Extreme
cold ambient temperatures may also cause
the appliance to not perform properly. This
dishwasher is not designed for use in a garage
or outdoor installation.
All parts removed must be saved to do
the reinstallation in the future. Ensure the
dishwasher is unplugged and empty.
We recommend that 2 people handle
the dishwasher during installation.
1. Please ensure the dishwasher is installed
by a qualified technician. Refer to the tools
required (not included).
The supplied door template contains
installation information which will
assist installation.
2. Ensure there is sufficient clearance on
each side of the unit to allow slight sideways
movement for servicing when required.
Good levelling is essential for correct closure
and sealing of the door. When the unit is
correctly levelled, the door should not catch
the inner liner on either side of the cabinet.
The adjustable feet may be loosened or
tightened in order to obtain the optimum
levelling of the unit.
* All images are for reference only; please refer to your individual unit for actual item.
KID60S17_IB.indd 9
580 550
850 850 620 620
30 30
600 600
850 850
596 600
unit in mm
level level
level
level
9
30/05/2017 12:41