Spray Arms - Kenwood KID60S17 Installation Instructions Manual

spray arms

• Do not over tighten the filters.
• Put the filters back in sequence securely, otherwise coarse debris could get into the
system and cause a blockage.
• NEVER use the dishwasher without the filters in place. Improper replacement of the filters
may reduce the performance level of the appliance and damage dishes and utensils.
Particles of food can get stuck in the spray arm jets and block them. They should be checked and
cleaned regularly.
1. Ensure the dishwasher is switched off.
2. Check the holes in the upper and lower spray arms for clogging. If there is any clogging, remove
the spray arms and clean them under running water.
3. The lower spray arm can be removed by pulling it upwards, while the upper spray arm nut can
be removed by turning the nut anticlockwise.
4. Be sure that the nut is perfectly tightened when refitting the upper spray arm.
KID60S17_IB.indd 31
31
30/05/2017 12:41